Home › Plumber in Richmond Hill › Commercial plumbing
Commercial Plumbing · Richmond Hill, ON · Updated November 2026

Commercial plumbing in Richmond Hill.

Retail, office, industrial, hospitality and healthcare plumbing, delivered by licensed plumbers who read the drawings, quote within 24 to 48 hours and build to the Ontario Plumbing Code. Signed. Sealed. Delivered.

Vertical drain and vent risers in a commercial build-out by Seal Plumbing

What commercial plumbing work do you do in Richmond Hill?

Seal Plumbing handles the full plumbing scope on commercial projects: drawing analysis and takeoffs, concrete scanning and slab cutting, underground and above-ground drain, vent and water line installation, fixture installation, and the permits and inspections that close the job. Quotes are submitted within 24 to 48 hours of receiving the drawings.

Richmond Hill commercial work ranges from a single storefront fit-out on Yonge Street to a new unit in Beaver Creek Business Park with underground drains still to be cut. Seal Plumbing is Pete and Joseph, licensed plumbers who have built retail, office, industrial, hospitality and healthcare projects across the GTA and now serve York Region and the north GTA from Richmond Hill out.

Every commercial job starts with the mechanical and architectural drawings. We analyze them, flag conflicts before they become change orders, and submit a written quote within 24 to 48 hours. On site we coordinate with your general contractor and the other trades, keep the plumbing inspections moving with the City of Richmond Hill, and leave each phase ready for the next trade.

Our crew is WHMIS and working-at-heights certified, and the company is licensed and insured. The pages below cover each commercial service and each sector in detail, and the main commercial page covers our GTA-wide commercial work.

Commercial scope we handle in Richmond Hill

  • Mechanical & architectural drawing analysis
  • Quotes submitted within 24 to 48 hours
  • Concrete scanning, slab cutting & chipping
  • Commercial drain, vent & water line installation
  • Ontario Plumbing Code compliance & inspections
  • WHMIS & working-at-heights certified crew

How does commercial plumbing work in Richmond Hill?

The same sequence on every commercial project, from the first set of drawings to the final inspection.

1

Send the drawings

Email the mechanical and architectural sets through the contact page. We review the plumbing scope, flag conflicts and confirm what the inspector will want to see.

2

Written quote in 24 to 48 hours

You get an itemized quote from the drawings, with exclusions stated, so your budget and schedule are set before anyone is on site.

3

Scan, cut and rough in

Concrete is scanned before any slab is cut. Underground drains go in first, then the above-ground drain, vent and water lines, each phase inspected before it is closed.

4

Fixtures, test and sign-off

Fixtures and equipment are set and tested, the final plumbing inspection is passed and you get the closeout you need for occupancy.

Underground drain trench in a commercial unit by Seal Plumbing
Underground drains cut and set
Vertical drain and vent risers in a commercial build-out by Seal Plumbing
Drain and vent risers

What does commercial plumbing cost in Richmond Hill?

Commercial plumbing in Richmond Hill is quoted in writing from the drawings, within 24 to 48 hours of receiving them. The price depends on the fixture count, how much concrete has to be opened for underground work, the length of the drain and water runs, and the equipment the project requires.

Fixture countWashrooms, kitchens and equipment hookups drive the labour and material.
Underground workScanning, cutting and chipping slab for new drains is a separate line in the quote.
Schedule and phasingRough-in, inspection and finish visits are planned around the other trades.

Commercial quotes are itemized by phase and submitted in writing within 24 to 48 hours of receiving the drawings. The written quote is the number that counts; changes to the drawings or scope are priced as change orders, also in writing.

What should Richmond Hill business owners know about commercial plumbing?

Backflow rules, meter lead times and the age of the building all shape a commercial plumbing job in Richmond Hill.

Backflow By-law 125-14

Richmond Hill's Backflow Prevention and Cross Connection Control By-law applies to industrial, commercial and institutional properties. Owners complete a cross-connection survey through a qualified contractor and have devices tested every year by a certified tester. We install the devices and test ports the survey calls for.

Meters for new units

For a non-residential building, the builder pays for the water meter when applying for the building permit, and large or bulk meters need six to eight months of notice. We plan the plumbing so it is complete and ready when the City's meter contractor arrives.

From Yonge to Beaver Creek

Commercial space in Richmond Hill runs from older storefronts on Yonge Street to the units in Beaver Creek Business Park, the city's largest business park at over 600 acres. Each one needs a different approach to drawings, tie-ins and inspections.

Send the drawings early. For a Richmond Hill project, we review the plumbing scope, flag backflow and meter requirements and give you a written quote within 24 to 48 hours. If the City has sent you a backflow survey letter, include it, since the report has a deadline.

Our Work

What does your recent commercial work look like?

Commercial fit-outs, underground drainage and risers from recent projects across the GTA. Tap a photo for a closer look.

See the full project gallery →

Which Richmond Hill areas do you serve?

Commercial and industrial units along the Highway 7 and Highway 404 corridors, in the Beaver Creek and Headford business parks, the Yonge Street storefronts, and projects across Vaughan, Markham, Aurora and the north GTA.

Yonge StreetHighway 7East Beaver Creek RoadBeaver Creek Business ParkHeadford Business ParkHighway 404 corridorLeslie StreetMajor Mackenzie DriveElgin Mills RoadCrosby Avenue

Commercial work across the GTA: see the main commercial plumbing page or all service areas →

Residential job instead? See our Richmond Hill plumber page.

Commercial Plumbing nearby: Vaughan, Markham, Aurora and King City.

Commercial Plumbing questions Richmond Hill businesses ask

If your property is industrial, commercial or institutional, yes. By-law 125-14 requires a cross-connection survey and annual testing of backflow devices by a certified tester, with reports sent to the City. The program does not apply to residential owners. Check the details with the City's compliance staff.
Yes. We take on fit-outs and service work in plazas along Highway 7 and Yonge Street and in units across the Beaver Creek and Headford business parks, quoted from the drawings and built to the Ontario Plumbing Code.
Yes. We handle commercial plumbing across Richmond Hill, Oak Ridges, Vaughan, Markham, Aurora and the north GTA, from single-unit fit-outs to new builds with underground drainage.
Within 24 to 48 hours of receiving the mechanical and architectural drawings. If drawings are not available yet, we can quote from a site visit and a scope letter.
Yes. We work under the Ontario Plumbing Code, coordinate with the City of Richmond Hill building department, and schedule the underground, rough-in and final plumbing inspections.
The crew is WHMIS and working-at-heights certified, and Seal Plumbing is licensed and insured. We provide the documents your site safety plan requires.
Retail, office, industrial, hospitality and healthcare projects. See the sector pages for what each type of build typically involves.

How do I get started?

Call 647-402-4825 or send your drawings through the contact page. Quotes on commercial work are submitted within 24 to 48 hours, in writing, from the mechanical and architectural drawings.