Home › Plumber in Markham › Commercial plumbing › Plumbing Drawing Analysis & Quotes
Takeoffs & Quotes · Markham, ON · Updated November 2026

Plumbing drawing analysis and quotes in Markham.

Send the mechanical and architectural drawings and you get a written, itemized plumbing quote within 24 to 48 hours, with the conflicts flagged before they become change orders.

Copper supply manifold in a commercial unit by Seal Plumbing

How do you quote a commercial plumbing project?

From the drawings. We take off every fixture, drain, vent and water run from the mechanical and architectural sets, check them against each other and the Ontario Plumbing Code, and submit a written quote within 24 to 48 hours with exclusions and phasing stated clearly.

Commercial plumbing budgets go wrong when the quote was a guess. Seal Plumbing quotes Markham projects from the actual drawings: the mechanical set for drain, vent and water sizing, the architectural set for fixture locations, walls and finishes, and the structural set where slab work or risers are involved.

The analysis catches the problems early: a drain route that crosses a footing, a vent with nowhere to go, fixture counts that do not match between the sets, or a water heater that is undersized for the fixture load. We flag them in the quote so you can resolve them with the engineer before the price moves.

Quotes are itemized by phase, underground, rough-in and finish, so your general contractor can schedule around them. If drawings are not ready, we can quote from a site visit and a scope letter and update it when the set is issued. See the Markham commercial plumbing overview for the full scope we deliver.

What the quote covers

  • Fixture and equipment takeoff
  • Drain, vent & water line quantities
  • Conflict check between mechanical, architectural & structural sets
  • Code review before permit
  • Itemized pricing by phase
  • Written quote within 24 to 48 hours

How does plumbing drawing analysis & quotes work in Markham?

Drawings in, written quote out, within two business days.

1

Send the sets

Email the mechanical, architectural and, where relevant, structural drawings through the contact page, with the schedule you are working to.

2

Takeoff and review

We quantify every fixture, run and piece of equipment and check the sets against each other and the code.

3

Written quote

You receive an itemized quote by phase within 24 to 48 hours, with exclusions and flagged conflicts.

4

Review call

We walk through the quote with you or your GC and adjust for any changes to the scope.

Copper supply manifold in a commercial unit by Seal Plumbing
Supply manifold built from the drawings
Copper rough-in on a commercial wall by Seal Plumbing
Copper rough-in on a commercial wall

What does plumbing drawing analysis & quotes cost in Markham?

Drawing analysis and quoting in Markham is part of how we bid commercial work, not a separate charge. The quote you receive within 24 to 48 hours reflects the fixture count, the drain and water runs, the underground work and the equipment on the drawings, broken out by phase.

By phaseUnderground, rough-in and finish are priced separately so you can schedule and draw against each.
Exclusions statedWhat is by others, such as fixtures supplied by the owner, is written into the quote.
RevisionsIf the drawings change, the quote is updated against the new issue.

Commercial quotes are itemized by phase and submitted in writing within 24 to 48 hours of receiving the drawings. The written quote is the number that counts; changes to the drawings or scope are priced as change orders, also in writing.

What should a Markham plumbing quote catch before work starts?

A useful quote for a Markham project lists the backflow, flood and heritage issues in the drawings, not just the fixture count.

Backflow in the takeoff

Every industrial, commercial and institutional property in Markham falls under Backflow Prevention By-law 2012-27. When we take off the drawings, we list each backflow device shown, note any connection that looks unprotected for its use, and include the permits for testable devices so they are not a surprise later.

Flood exposure

Some Markham sites sit where the City has documented flood risk, such as the businesses around the Don Mills Channel or the lands along Rouge River Tributary 5 near Markham Centre. If a project falls in an area like that, the quote flags backwater valves and drain details worth raising with the engineer.

Heritage main streets

Buildings on Main Street Markham and Main Street Unionville are inside heritage conservation districts. Interior plumbing is unaffected, but a new exterior vent, cleanout or opening may need a heritage permit. Those items are listed separately in the quote so the owner can raise them with the City early.

Send the mechanical and architectural drawings for your Markham project and you get an itemized written quote within 24 to 48 hours. Fixture counts, pipe quantities, code questions and any backflow, flood or heritage concerns are all listed, so they can be settled with the designer before the first trench is opened.

Our Work

What does your recent commercial work look like?

Commercial rough-ins and fit-outs delivered from the drawings on recent projects. Tap a photo for a closer look.

See the full project gallery →

Which Markham areas do you serve?

Commercial and industrial units along Highway 7, Woodbine Avenue and Denison Street, the Main Street Unionville and Main Street Markham storefronts, and projects across Markham, Richmond Hill, Stouffville and the north GTA.

Highway 7Woodbine AvenueDenison StreetTorbay RoadSteeles AvenueKennedy RoadMcCowan RoadMain Street UnionvilleMain Street MarkhamMarkham Centre

Commercial work across the GTA: see the main commercial plumbing page or all service areas →

Residential job instead? See our Markham plumber page.

Plumbing Drawing Analysis & Quotes nearby: Richmond Hill, Stouffville and Vaughan.

Plumbing Drawing Analysis & Quotes questions Markham businesses ask

Yes, from a site visit and a scope letter. The quote states that a mechanical design may still be needed for the permit, and that the price is tied to the scope described. Once the mechanical set arrives, we confirm or adjust the numbers in writing.
Yes. We read the drawings against Markham's Backflow Prevention By-law 2012-27 and the intended use, and list any backflow device that is missing or unclear. Catching it at the quote is far easier than adding a testable device after the inspector asks for one.
The mechanical plumbing drawings and the architectural plans at minimum. Structural drawings help when slab cutting or riser penetrations are involved.
Yes, from a site visit and a scope letter, with the understanding that a mechanical design may be required for the permit. We say so in the quote.
Within 24 to 48 hours of receiving the drawings. Larger multi-phase projects may take the full 48 hours.
Yes. Conflicts between the sets, code issues and routing problems are listed in the quote so they can be resolved before work starts.
The quote is fixed to the drawings it was based on. Changes to the drawings or scope are priced as change orders in writing.

How do I get started?

Call 647-402-4825 or send your drawings through the contact page. Quotes on commercial work are submitted within 24 to 48 hours, in writing, from the mechanical and architectural drawings.