Home › Plumber in Stouffville › Commercial plumbing › Commercial Rough-In & Tenant Fit-Out Plumbing
Fit-Outs & Rough-Ins · Stouffville, ON · Updated November 2026

Commercial rough-in and tenant fit-out plumbing in Stouffville.

Taking a shell unit or a tired space in Stouffville and plumbing it for its new tenant: washrooms, break rooms, kitchens, utility sinks and equipment, roughed in from the drawings and finished to the fixture schedule.

Copper supply lines run in a commercial fit-out by Seal Plumbing

What does tenant fit-out plumbing include?

Everything from the existing building stubs to the finished fixtures: new washrooms and break rooms, kitchen and equipment hookups, water heaters, floor drains and the drain, vent and water lines that feed them. We rough it in from the drawings, pass the inspections and set the fixtures on the finish schedule.

A shell unit in the Gormley industrial area comes with capped stubs and a bare slab. A storefront on Main Street comes with a previous tenant's layout that no longer fits. Either way, Seal Plumbing takes the architectural and mechanical drawings, prices the fit-out within 24 to 48 hours and delivers the plumbing in two clean phases: rough-in before the walls close, finish once the millwork and flooring are in.

Rough-in includes any slab work for new floor drains or washroom groups, the drain, vent and water lines to each fixture, water heater and equipment connections and the shut-offs that let the tenant isolate their own unit. Finish includes fixtures, faucets, trim, equipment connections and the final test and inspection.

We coordinate directly with your general contractor and the landlord's base-building requirements, and we handle the permit and inspection sequence so the handover is not delayed.

Fit-out plumbing we deliver

  • Washroom groups & barrier-free washrooms
  • Break rooms, kitchenettes & commercial kitchens
  • Equipment hookups: dishwashers, ice machines, sterilizers
  • Water heaters & recirculation
  • Floor drains, hub drains & cleanouts
  • Tenant shut-offs & backflow prevention

How does commercial rough-in & tenant fit-out plumbing work in Stouffville?

Two phases, coordinated with the other trades, with inspections passed in between.

1

Quote from the drawings

Written, itemized quote within 24 to 48 hours of receiving the fit-out drawings.

2

Rough-in

Slab work if needed, then drain, vent and water lines to every fixture location, pressure tested and inspected before drywall.

3

Finish

Fixtures, trim, water heater and equipment connections set once millwork and flooring are complete.

4

Test and handover

Everything is run and tested, the final inspection is passed and the tenant gets a walkthrough of shut-offs and cleanouts.

Copper supply lines run in a commercial fit-out by Seal Plumbing
Copper supply in a commercial fit-out
Commercial toilet installed by Seal Plumbing
Commercial washroom fixtures set

What does commercial rough-in & tenant fit-out plumbing cost in Stouffville?

Tenant fit-out plumbing in Stouffville is quoted in writing from the drawings, within 24 to 48 hours. The price depends on the fixture count, how far the new fixtures are from the existing stubs, whether the slab has to be opened and the equipment the tenant brings.

Fixture countEach washroom group, kitchenette or kitchen adds drains, vents, supply and fixtures.
Distance from stubsNew fixtures far from the existing connections mean longer runs and possibly slab work.
EquipmentCommercial dishwashers, ice machines and specialty equipment need dedicated connections.

Commercial quotes are itemized by phase and submitted in writing within 24 to 48 hours of receiving the drawings. The written quote is the number that counts; changes to the drawings or scope are priced as change orders, also in writing.

What does a tenant fit-out in Stouffville need from the plumber?

Shell units, business park suites and older Main Street storefronts each start from different existing services.

Business park suites

Most employment land in urban Stouffville is designated Business Park Area, which allows offices, service commercial and commercial recreation uses. A suite moving from office use to a gym or studio may need more washrooms, showers or floor drains, and we rough them in from the drawings.

Industrial shells

A new unit in the Gormley or Vandorf industrial areas may arrive with capped services and a bare slab. We scan and cut for washrooms and floor drains, run the water distribution, and set the fixtures on the finish schedule.

Meters and the opening date

If the fit-out needs a new or larger Town water meter, the request should go in early, because the Town lists about 20 weeks for meters two inches and larger. We sequence the rough-in, testing and inspections so only the meter connection is left waiting.

Agree the scope with the landlord before the drawings are final. Base-building items such as the tenant shut-off, metering and backflow protection are often the landlord's call. In Stouffville's older Main Street buildings, also confirm what the existing drain can carry before you add fixtures to the plan.

Our Work

What does your recent commercial work look like?

Fit-outs and rough-ins from recent commercial projects. Tap a photo for a closer look.

See the full project gallery →

Which Stouffville areas do you serve?

Commercial and industrial units in the Gormley and Vandorf industrial areas, the business park lands of urban Stouffville, the Main Street storefronts, and projects across Whitchurch-Stouffville, Markham, Richmond Hill and the north GTA.

Main StreetSandiford DriveGormleyVandorfStouffville GO areaHighway 48Ninth LineTenth LineMarkhamRichmond Hill

Commercial work across the GTA: see the main commercial plumbing page or all service areas →

Residential job instead? See our Stouffville plumber page.

Commercial Rough-In & Tenant Fit-Out Plumbing nearby: Markham, Richmond Hill, Aurora and Newmarket.

Commercial Rough-In & Tenant Fit-Out Plumbing questions Stouffville businesses ask

Yes. We handle the slab work, underground drains, washroom groups, lunchrooms and equipment connections, quoted from the drawings within 24 to 48 hours. Each phase is inspected before it is covered, so the finish trades are not held up.
Yes. Older storefronts often need the previous layout removed and new washrooms or a kitchenette added. We check the existing drain and water service first, then rough in, finish and test everything to the fixture schedule.
Yes. Most fit-outs run through a GC and we schedule our rough-in and finish phases around the other trades.
Yes. That usually means cutting the slab for the new drains, which we scan, cut and inspect as part of the job.
Yes. Owner-supplied fixtures and equipment are welcome; we confirm the rough-in matches the spec sheets before the finish phase.
We review them with the drawings and build the tenant isolation, backflow and metering connections the landlord requires.
Rough-in is usually days, not weeks, for a typical unit; the finish phase follows the millwork and flooring. The quote includes a phase schedule.

How do I get started?

Call 647-402-4825 or send your drawings through the contact page. Quotes on commercial work are submitted within 24 to 48 hours, in writing, from the mechanical and architectural drawings.