Home › Plumber in Stouffville › Commercial plumbing › Industrial Plumbing
Industrial · Stouffville, ON · Updated November 2026

Industrial plumbing contractor in Stouffville.

Plants, warehouses and shops in the Gormley and Vandorf industrial areas and across Whitchurch-Stouffville: process and wash-down water, trench and floor drains, washroom groups and backflow prevention, installed from the drawings by a WHMIS and working-at-heights certified crew.

Commercial drain stacks installed by Seal Plumbing

What does industrial plumbing cover?

Beyond the washrooms and lunchroom, industrial plumbing means process water and wash-down lines, trench drains and floor drains sized for the floor area, oil and sediment interception where the use requires it, backflow prevention to protect the municipal supply, and water heating for the fixture load. We install it from the mechanical drawings and pass the inspections.

Industrial units in Whitchurch-Stouffville, from the Gormley and Vandorf industrial areas to the business park lands of urban Stouffville, have plumbing that works harder than a storefront: wash-down stations, trench drains across a production floor, process water with backflow protection, and washroom groups sized for shift changes. Seal Plumbing installs it from the drawings and quotes within 24 to 48 hours.

Below-slab work is common on industrial projects, so our concrete scanning and slab cutting service is part of the same crew and the same quote. Above ground, water distribution is run in copper, sized and valved so a line can be isolated without shutting the plant down.

The crew is WHMIS and working-at-heights certified, which matters on a site with mezzanines, racking and lift work, and the company is licensed and insured. Inspections and permits run through our code compliance process.

Industrial plumbing we deliver

  • Process & wash-down water lines
  • Trench drains, floor drains & hub drains
  • Oil & sediment interceptors where required
  • Backflow prevention on the service
  • Washroom groups, lunchrooms & emergency eyewash connections
  • Water heaters sized to the fixture load

How does industrial plumbing work in Stouffville?

Underground first, then distribution, with isolation valves so the plant keeps running.

1

Quote from the drawings

Itemized quote within 24 to 48 hours, with the underground and above-ground phases separated.

2

Scan, cut and underground

Slab scanned and cut for trench and floor drains, drains set and inspected before backfill.

3

Distribution and equipment

Water distribution, backflow prevention, wash-down and process connections installed and isolated by zone.

4

Test and sign-off

System tested, final inspection passed and valve locations documented for your maintenance team.

Commercial drain stacks installed by Seal Plumbing
Drain stacks in an industrial unit
Underground drain trench in a commercial unit by Seal Plumbing
Underground drain trench

What does industrial plumbing cost in Stouffville?

Industrial plumbing in Stouffville is quoted in writing from the mechanical drawings, within 24 to 48 hours. The price depends on the floor area to be drained, the length of trench and slab work, the process water scope and the backflow and interception equipment required.

Trench and floor drainsLength of trench drain and slab cutting drive the underground phase.
Process waterWash-down stations and process connections add distribution, valving and backflow devices.
Washroom and lunchroom groupsShift-change fixture counts set the washroom scope.

Commercial quotes are itemized by phase and submitted in writing within 24 to 48 hours of receiving the drawings. The written quote is the number that counts; changes to the drawings or scope are priced as change orders, also in writing.

What industrial plumbing do Gormley and Vandorf units need?

The Town's primary industrial areas need process water, drains and washrooms built for real work.

Primary industrial areas

Official Plan Amendment No. 4, adopted by Council on June 17, 2026, reinforces Gormley and Vandorf as Whitchurch-Stouffville's primary industrial employment areas. Plants, warehouses and shops there need wash-down water, trench and floor drains and washroom groups sized for shift changes.

Sewer surcharge

The Town notes that York Region may apply a sewer surcharge to certain commercial and industrial establishments. What leaves an industrial unit matters, so oil and sediment interceptors, where the use requires them, are part of the design rather than an afterthought.

Prestige industrial

The Gormley Industrial Secondary Plan's Prestige Industrial category requires permitted uses to be carried out inside enclosed buildings. Wash-down, process water and drainage for those uses all run indoors, so drains need to be sized and placed for the full floor area.

For an industrial unit in Stouffville, send the process equipment list with the mechanical drawings, because water use, drainage and backflow protection all depend on it. We quote within 24 to 48 hours, and our crew is WHMIS and working-at-heights certified for work on active sites.

Our Work

What does your recent commercial work look like?

Underground drains, risers and distribution from recent commercial and industrial projects. Tap a photo for a closer look.

See the full project gallery →

Which Stouffville areas do you serve?

Commercial and industrial units in the Gormley and Vandorf industrial areas, the business park lands of urban Stouffville, the Main Street storefronts, and projects across Whitchurch-Stouffville, Markham, Richmond Hill and the north GTA.

Main StreetSandiford DriveGormleyVandorfStouffville GO areaHighway 48Ninth LineTenth LineMarkhamRichmond Hill

Commercial work across the GTA: see the main commercial plumbing page or all service areas →

Residential job instead? See our Stouffville plumber page.

Industrial Plumbing nearby: Markham, Richmond Hill, Aurora and Newmarket.

Industrial Plumbing questions Stouffville businesses ask

Yes. We scan the slab, cut the trench, set the drain and have it inspected before backfill. The drain is sized for the floor area and the wash-down load shown on the drawings, and the slab is patched once it passes.
It depends on the use. Shops that handle oil, grease or sediment usually need one, and York Region may surcharge some commercial and industrial discharges. We install the interceptor the drawings specify and size it to the fixtures and floor drains.
Yes. We phase the work by zone, isolate lines rather than shut the service, and schedule tie-ins for planned downtime.
Yes, to the municipality's requirements, with the isolation valves and test ports for annual testing.
The crew is WHMIS and working-at-heights certified and the company is licensed and insured. We supply the documentation your safety plan requires.
Yes. Slab is scanned and cut along the drain route, the trench drain set to slope and the underground inspection passed before the slab is patched.
We run the tempered water and drain connections the safety station requires, to the manufacturer's specification.

How do I get started?

Call 647-402-4825 or send your drawings through the contact page. Quotes on commercial work are submitted within 24 to 48 hours, in writing, from the mechanical and architectural drawings.