Home › Plumber in Richmond Hill › Toilet Repair
Toilets · Richmond Hill, ON · Updated November 2026

Toilet repair in Richmond Hill.

Running toilets, leaks at the base, weak or clogged flushes, a tank that will not fill. Repaired by licensed plumbers with upfront pricing, and an honest word on when a replacement makes more sense.

Finished toilet and vanity installation by Seal Plumbing

Can a running or leaking toilet be repaired?

Usually, yes. A running toilet is normally a worn flapper, fill valve or flush seal, and a leak at the base is a failed wax seal or flange. We repair the part, test the flush and tell you honestly if a replacement makes more sense.

A toilet that keeps running wastes water every hour; one that leaks at the base is quietly soaking the subfloor. Seal Plumbing handles all of it for Richmond Hill homes: flapper and fill valve repairs, flush valve seals, wax seal and flange repairs, supply line and shut-off replacement, and clearing clogs that a plunger cannot. Pete and Joseph are the same licensed plumbers who build our custom bathrooms, and a toilet repair gets the same clean work and leak test.

We also tell you honestly when a repair is not worth it. A 30-year-old toilet with a cracked tank or a worn-out flush valve body is often cheaper to replace than to keep fixing, and a new one uses a fraction of the water. You get both prices and you decide. See our Richmond Hill toilet installation page for what a replacement involves.

If the toilet rocks or there is water around the base, do not keep using it. The wax seal has likely failed and every flush reaches the floor. Our running toilet guide covers the most common causes.

Toilet repairs in Richmond Hill

  • Running toilets, flappers & fill valves
  • Leaks at the base, wax seals & flanges
  • Clogs & weak flushes
  • Rocking or loose toilets
  • Supply lines & shut-off valves
  • Honest repair vs replace advice

How does toilet repair work in Richmond Hill?

Diagnose, quote, fix, test. Most toilet repairs are done in a single visit.

1

Get in touch

Tell us what the toilet is doing: running, leaking, rocking, flushing weak or not at all. Most of the time we can tell you what to expect over the phone.

2

On-site diagnosis

We check the tank parts, the seal and flange, the supply and the drain so the repair fixes the cause, not just the noise.

3

Repair

Upfront pricing for the repair, and an honest comparison if a new toilet makes more sense than fixing an old one.

4

Test and clean up

Flush tested, checked for leaks at the base and supply, and left clean.

Finished toilet and vanity installation by Seal Plumbing
Reset and tested
Under-sink drain and trap assembly connected at a new vanity
Supply and shut-off

What does toilet repair cost in Richmond Hill?

Most toilet repairs in Richmond Hill run $200 to $300. These are Seal Plumbing's estimate ranges as of October 2026, before tax; your written quote is the number that counts.

Toilet repair in Richmond Hill is priced upfront on site and most repairs are done in one visit. The price depends on which part has failed and whether the flange under the toilet needs repair.

Tank partsFlappers, fill valves and flush seals are the quickest repairs.
Seal and flangePulling the toilet to replace the wax seal or repair a broken flange takes longer.
Repair or replaceWe give both prices when a new toilet is the smarter spend.

Every job is quoted before work starts, in writing for anything beyond a small repair, and the quote is the number that counts. Same-day quotes on most small jobs; larger projects within 24 to 48 hours of a site visit.

Why do toilets run or leak in Richmond Hill homes?

Most toilet problems come down to worn parts, but the water and the age of the house both play a role.

Mineral build-up on parts

Richmond Hill's water is listed at 127 mg/L of hardness. Over time, minerals can stiffen flappers and fill valves so they do not seal or shut off cleanly. Replacing the worn parts usually stops the running without replacing the whole toilet.

Base leaks in older houses

In bungalows from the 1950s to the 1970s in South Richvale and Harding, the toilet flange may have been set decades ago. A rocking toilet or water at the base usually means the wax seal or flange has failed, and we repair it before the subfloor suffers.

Running water on the meter

A toilet that runs quietly can waste a surprising amount of water. The City's new Neptune meters show usage by the hour, which makes a constant overnight flow easy to spot. If you see one on your account, check the toilets first.

Most toilet repairs in Richmond Hill take one visit. Turn off the shut-off behind the toilet if it will not stop running, and do not flush a toilet that is leaking at the base. We bring common parts, and if a toilet is cracked or past repair, we tell you so you can decide.

What other plumbing services do you offer in Richmond Hill?

The same two licensed plumbers, across everything a Richmond Hill home needs.

Our Work

What does your recent work look like?

Toilets, carriers and finished bathrooms from recent jobs across the GTA and Simcoe County. Tap a photo for a closer look.

See the full project gallery →

Which Richmond Hill areas do you serve?

From Oak Ridges and Lake Wilcox on the Oak Ridges Moraine down to Langstaff and Doncrest at Highway 7, including Mill Pond, Crosby, Harding, Richvale, Bayview Hill, Rouge Woods, Jefferson, Westbrook and North Leslie.

Oak RidgesLake WilcoxMill PondCrosbyHardingRichvaleBayview HillRouge WoodsDoncrestLangstaff

Also serving nearby: Vaughan, Markham, Aurora, King City and Toronto. See all service areas →

Need something else? See our Richmond Hill plumber page or the full service and repairs overview.

Toilet Repair nearby: Vaughan, Markham, Aurora and King City.

Toilet Repair questions Richmond Hill homeowners ask

Usually the flapper or fill valve is seeping and the tank tops itself up every so often, which is easier to hear when the house is quiet. Mineral build-up from hard water can speed this up. A new flapper or fill valve normally fixes it.
Yes. In condo suites along Yonge Street and around Langstaff, we repair or replace the toilet and its shut-off inside your unit. If water has reached the suite below, let your property manager know as well, so the building can check its side.
Usually, yes. A running toilet is normally a worn flapper, a fill valve set wrong or a failing flush valve seal. We replace the part and check the rest of the tank.
It can be. A failed wax seal lets waste water reach the subfloor every flush. We pull the toilet, inspect the flange, replace the seal and reset it. If the flange is broken, we repair that too.
Often mineral build-up in the rim jets, a low tank level, or a partial clog in the trap or drain. We check each and fix the actual cause.
If the toilet is old, cracked, or needs a flush valve body, replacement usually wins on cost and water use. We give you both prices.
Same-day quotes on most small jobs, and we try our best to provide immediate service for leaks.

How do I get started?

Call 647-402-4825 or send a few details through the contact page. You get an estimated arrival time on the call and a written quote before any work starts.