Bathroom Plumbing Renovations in Richmond Hill.
Plumbing only. Rough-ins, drain and vent changes, moving fixtures and the final installs for your bathroom reno. We work alongside your contractor and leave the tile and finishes to them. Two licensed plumbers, written quotes before we start.

How does bathroom renovation plumbing work in Richmond Hill?
Seal Plumbing is the plumbing trade on your bathroom renovation, not the renovation contractor: we rough in the drains, vents, supply and valves before your walls close, then come back to set the fixtures after tile. Two visits, one licensed crew, a written quote before we start.
Most bathroom renovation companies serving Richmond Hill sell the whole room: demolition, tile, vanity, paint and a plumber somewhere on the crew. That is not us. Seal Plumbing is the plumbing trade on your renovation. We handle everything behind the walls and under the floor, from the first drain cut to the last faucet, and hand the finishes back to you or your contractor.
That split works in your favour. You get licensed plumbers who do this every day, a plumbing quote you can compare line by line, and a rough-in planned around your actual layout and fixtures instead of squeezed in after the tile is picked. You deal directly with Pete and Joseph, the two licensed plumbers doing the work.
Already have a contractor? Send us the drawings and the fixture list and we will coordinate with them. Doing a plumbing-only refresh, like new toilet, vanity and shower valve in the same spots? We can handle that start to finish. Either way, it is the same crew that plumbs our custom homes.
What we handle
- Bathroom rough-in plumbing
- Moving toilets, showers & vanities
- Drain & vent reconfiguration
- Shower valves, tub fillers & body sprays
- Supply line upgrades & shut-offs
- Final fixture installation & testing
What we leave to your contractor
- Tile, waterproofing & flooring
- Drywall, paint & trim
- Cabinetry & vanity supply
- Electrical & ventilation fans
- General demolition & framing
- Design & project management
What are the steps in a bathroom plumbing renovation?
Two visits, one crew. We rough in before your trades close the walls, then come back to set the fixtures once the tile is done.
Plan from your layout
We work from your drawings and fixture list, confirm drain and vent routes, and flag anything that will not fit before a wall is opened. Why fixtures come before rough-in.
Rough-in
Supply, drains, vents, shower valves and tub drains set to the finished tile depth, pressure tested and left inspection-ready. Permits where the scope needs them.
Your trades finish
Tile, waterproofing, drywall and cabinetry go in around capped stubs and protected valves. We stay reachable if your contractor hits a surprise.
Final install
Toilet, faucets, shower trim, tub filler and drains connected, leak-tested and cleaned up. One plumber owns the job from the first cut to the last fixture.


What bathroom plumbing do you handle in Richmond Hill?
Every part of the plumbing scope on a bathroom renovation.
What does your recent bathroom work look like?
Rough-ins, relocated fixtures and finished bathrooms from recent renovations across the GTA and Simcoe County. Tap a photo for a closer look.
What does bathroom plumbing cost in Richmond Hill?
The plumbing is usually the part of a bathroom renovation that decides the budget, because moving a fixture costs real money and keeping it in place saves it. These are the 2026 Toronto-area market ranges from our bathroom renovation cost guide. Your written quote for your Richmond Hill project is the number that counts.
Older homes can add to that: galvanized supply lines and cast iron stacks are easier to replace while the wall is open. We tell you what we find and price it before we touch it.
How does house age change a Richmond Hill bathroom renovation?
The plumbing behind the walls ranges from the 1800s to the 2000s, and the rough-in plan has to match what is there.
Heritage and older homes
Houses near Yonge Street and Mill Pond, including some from the 1800s, can have drains and supply that were changed several times. We open the walls with a plan to replace what is tired and tie in cleanly to what stays.
1950s to 1970s bungalows
When a main-floor bathroom in a South Richvale, Harding or Crosby bungalow is gutted, that is the right time to replace old supply and drain pipe and add a pressure-balanced shower valve while the walls are open and easy to reach.
1990s and 2000s ensuites
Ensuites in Bayview Hill, Rouge Woods and Devonsleigh were built in the 1990s and early 2000s. Updating them can mean moving a tub, adding a larger shower or a double vanity, and we reroute the drains and supply to suit the new layout.
Whatever the age of your Richmond Hill home, we plan the plumbing before demolition, confirm any permit with the City's Building Division and rough in to the Ontario Plumbing Code. Pete and Joseph quote in writing first, and the rough-in is tested before tile goes up, so nothing is buried untested.
Which Richmond Hill neighbourhoods do you work in?
From Oak Ridges and Lake Wilcox on the Oak Ridges Moraine down to Langstaff and Doncrest at Highway 7, including Mill Pond, Crosby, Harding, Richvale, Bayview Hill, Rouge Woods, Jefferson, Westbrook and North Leslie.
Also plumbing bathroom renovations in Vaughan, Markham, Aurora, King City and Toronto. See all service areas →
Need general plumbing in Richmond Hill? See our Richmond Hill plumber page or the full residential services.
Bathroom plumbing questions Richmond Hill homeowners ask
How do I get started?
Send the layout and fixture list through the contact page or call 647-402-4825. You get a written plumbing quote your contractor can build around, usually within 24 to 48 hours of seeing the plans.