Industrial plumbing contractor in Vaughan.
Plants, warehouses and shops in Concord, the Vaughan Enterprise Zone and the Highway 400 and 407 employment areas: process and wash-down water, trench and floor drains, washroom groups and backflow prevention, installed from the drawings by a WHMIS and working-at-heights certified crew.

What does industrial plumbing cover?
Beyond the washrooms and lunchroom, industrial plumbing means process water and wash-down lines, trench drains and floor drains sized for the floor area, oil and sediment interception where the use requires it, backflow prevention to protect the municipal supply, and water heating for the fixture load. We install it from the mechanical drawings and pass the inspections.
Industrial units across Vaughan, from the shops along Highway 7 and Keele Street in Concord to the larger buildings in the Vaughan Enterprise Zone, have plumbing that works harder than a storefront: wash-down stations, trench drains across a production floor, process water with backflow protection, and washroom groups sized for shift changes. Seal Plumbing installs it from the drawings and quotes within 24 to 48 hours.
Below-slab work is common on industrial projects, so our concrete scanning and slab cutting service is part of the same crew and the same quote. Above ground, water distribution is run in copper, sized and valved so a line can be isolated without shutting the plant down.
The crew is WHMIS and working-at-heights certified, which matters on a site with mezzanines, racking and lift work, and the company is licensed and insured. Inspections and permits run through our code compliance process.
Industrial plumbing we deliver
- Process & wash-down water lines
- Trench drains, floor drains & hub drains
- Oil & sediment interceptors where required
- Backflow prevention on the service
- Washroom groups, lunchrooms & emergency eyewash connections
- Water heaters sized to the fixture load
How does industrial plumbing work in Vaughan?
Underground first, then distribution, with isolation valves so the plant keeps running.
Quote from the drawings
Itemized quote within 24 to 48 hours, with the underground and above-ground phases separated.
Scan, cut and underground
Slab scanned and cut for trench and floor drains, drains set and inspected before backfill.
Distribution and equipment
Water distribution, backflow prevention, wash-down and process connections installed and isolated by zone.
Test and sign-off
System tested, final inspection passed and valve locations documented for your maintenance team.


What does industrial plumbing cost in Vaughan?
Industrial plumbing in Vaughan is quoted in writing from the mechanical drawings, within 24 to 48 hours. The price depends on the floor area to be drained, the length of trench and slab work, the process water scope and the backflow and interception equipment required.
Commercial quotes are itemized by phase and submitted in writing within 24 to 48 hours of receiving the drawings. The written quote is the number that counts; changes to the drawings or scope are priced as change orders, also in writing.
What industrial plumbing do Vaughan plants and warehouses need?
Process water, floor drains, backflow and sewer use limits for buildings in Concord, the Enterprise Zone and the Highway 400 lands.
Severe hazard sites
Vaughan's backflow program lists automotive repair shops, food processing plants and carwashes as severe hazards. They need a reduced pressure principle assembly, which is designed to discharge water into a floor drain when it fails, so a drain must be close by. We plan the device and drain together.
Discharge limits
Industrial wastewater in Vaughan must meet the Sewer Use By-law 025-2024 limits for pH, suspended solids, grease and other substances, monitored together with York Region. Wash-down areas and process drains may need interceptors or treatment before the sanitary sewer. We build those connections to the drawings.
Industrial areas
Concord grew around the CN MacMillan Yard, and Woodbridge's industry sits mainly along Steeles Avenue and west of Highway 400. The Vaughan Enterprise Zone adds 1,668 hectares of business park in the west end. We quote industrial plumbing across all of them.
For a Vaughan plant or warehouse, map every point where water leaves the building: process drains, wash-down, washrooms and roof drains. The City and York Region monitor what goes into both sanitary and storm sewers. A clear drainage plan keeps inspections and any future sampling straightforward.
What other commercial plumbing services do you offer in Vaughan?
The same licensed crew, across every commercial service and sector in Vaughan.
What does your recent commercial work look like?
Underground drains, risers and distribution from recent commercial and industrial projects. Tap a photo for a closer look.
Which Vaughan areas do you serve?
Commercial and industrial units along the Highway 7 corridor and through Concord, in the Vaughan Metropolitan Centre and the Vaughan Enterprise Zone, the Woodbridge Avenue and Market Lane storefronts, and projects across York Region and the north GTA.
Commercial work across the GTA: see the main commercial plumbing page or all service areas →
Residential job instead? See our Vaughan plumber page.
Industrial Plumbing nearby: King City, Richmond Hill, Brampton and Bolton.
Industrial Plumbing questions Vaughan businesses ask
How do I get started?
Call 647-402-4825 or send your drawings through the contact page. Quotes on commercial work are submitted within 24 to 48 hours, in writing, from the mechanical and architectural drawings.