Home › Plumber in Richmond Hill › Kitchen Plumbing
Kitchen Plumbing · Richmond Hill, ON · Updated November 2026

Kitchen plumbing in Richmond Hill.

Sink and faucet installs, dishwasher and fridge water lines, island rough-ins and relocating the sink for an open-concept renovation. Licensed plumbers who plan the rough-in so your kitchen never waits on plumbing.

Seal Plumbing kitchen island drain and supply rough-in

What kitchen plumbing work do you do in Richmond Hill?

Everything from a leaky faucet to a full kitchen rough-in: sink and faucet installs, dishwasher and fridge lines, garburator hookups, island sink rough-ins and moving the sink for a new layout. Renovations get two visits, rough-in then final hookups.

Kitchen plumbing in Richmond Hill runs from quick fixes to full renovations. On the small side: a dripping faucet, a clogged sink, a dishwasher that needs a proper supply and drain, or a fridge water line. On the big side: moving the sink to a new wall, roughing in an island with a sink and dishwasher, and bringing the drains and venting up to code while the walls are open. Pete and Joseph do both, and quote every job in writing first.

The island is where most kitchen renos get tricky. An island sink needs a drain and vent that run under the floor, and in a finished basement or a slab that takes planning. We work from your layout and cabinet drawings, confirm the routes before anything is cut, and rough in the supply and drain so the cabinet installer has nothing to work around. Our kitchen rough-ins page covers the renovation scope in detail.

Already have a contractor? We coordinate the rough-in and the final hookups with them. Doing a plumbing-only update, like a new faucet, sink and dishwasher in the same spots? We handle that start to finish, including the garburator hookup if you have one.

Kitchen plumbing in Richmond Hill

  • Kitchen faucet & sink installation
  • Dishwasher supply & drain hookups
  • Fridge & ice maker water lines
  • Island sink rough-ins
  • Relocating the sink for a new layout
  • Kitchen drain clogs & garburator hookups

How does kitchen plumbing work in Richmond Hill?

Two visits on a renovation, one on a repair. Either way the plumbing is planned before anything is cut.

1

Get in touch

Tell us whether it is a repair, a fixture swap or a renovation. For renos, send the layout and the cabinet drawings.

2

On-site consultation

We confirm drain and vent routes, check the existing supply and tell you what will and will not work before a wall is opened.

3

Rough-in

Supply, drains and vents roughed in to the new layout, pressure tested and inspection ready. Your cabinets and counters go in.

4

Final hookups

Sink, faucet, dishwasher, fridge line and garburator connected, tested and left clean.

Seal Plumbing kitchen island drain and supply rough-in
Island rough-in
Seal Plumbing finished kitchen sink and disposal hookup
Final hookup

What does kitchen plumbing cost in Richmond Hill?

Most kitchen plumbing jobs in Richmond Hill, such as a sink and faucet install, a dishwasher hookup or a garburator install, run $250 to $600. These are Seal Plumbing's estimate ranges as of October 2026, before tax; your written quote is the number that counts.

Kitchen plumbing in Richmond Hill is quoted before we start: same-day for fixture swaps and repairs, within 24 to 48 hours for a full rough-in from your drawings. The price depends on whether fixtures stay in place or move, and whether an island needs drain and vent run under the floor.

Fixtures stay putSink, faucet, dishwasher and fridge line hookups are the low end.
Sink movesNew drain, vent and supply routed to the new wall.
IslandDrain and vent under the floor, planned from your cabinet drawings.

Every job is quoted before work starts, in writing for anything beyond a small repair, and the quote is the number that counts. Same-day quotes on most small jobs; larger projects within 24 to 48 hours of a site visit.

What plumbing should a Richmond Hill kitchen renovation plan for?

The age of the house and where the sink is moving decide how much of the drain and supply needs to change.

Opening up older kitchens

When a 1950s to 1970s kitchen in South Richvale, Harding or Crosby is opened up, the sink often moves. That means rerouting the drain and vent, and we check the old pipe we will be tying into before the cabinets are ordered.

Island sinks in larger homes

If you are adding an island sink in a larger Bayview Hill or South Richvale kitchen, it needs a drain and vent planned under the floor. We rough it in before the flooring and cabinets go down, so nothing has to be lifted later.

Fridge and filter lines

Richmond Hill's Lake Ontario water is listed at 127 mg/L of hardness. If you want filtered water at the fridge or a separate tap, we run the line with its own shut-off and leave room under the sink for a filter that is easy to change.

Bring us in when the kitchen layout is drawn, before cabinets are ordered. In a Richmond Hill renovation, that gives us time to plan the drain slope, the vent and any permit the work needs. It also lets your cabinet installer and electrician work around pipes that are already in place.

What other plumbing services do you offer in Richmond Hill?

The same two licensed plumbers, across everything a Richmond Hill home needs.

Our Work

What does your recent work look like?

Sinks, hookups and rough-ins from recent kitchen jobs across the GTA and Simcoe County. Tap a photo for a closer look.

See the full project gallery →

Which Richmond Hill areas do you serve?

From Oak Ridges and Lake Wilcox on the Oak Ridges Moraine down to Langstaff and Doncrest at Highway 7, including Mill Pond, Crosby, Harding, Richvale, Bayview Hill, Rouge Woods, Jefferson, Westbrook and North Leslie.

Oak RidgesLake WilcoxMill PondCrosbyHardingRichvaleBayview HillRouge WoodsDoncrestLangstaff

Also serving nearby: Vaughan, Markham, Aurora, King City and Toronto. See all service areas →

Need something else? See our Richmond Hill plumber page or the full service and repairs overview.

Kitchen Plumbing nearby: Vaughan, Markham, Aurora and King City.

Kitchen Plumbing questions Richmond Hill homeowners ask

Moving a sink changes the drain and vent, and we confirm with the City's Building Division whether your project needs a permit before work starts. If one is needed, we build to pass the plumbing inspection the first time.
Yes. A suite kitchen needs a drain, vent and supply sized for a second household. We plan it with the bathroom and laundry so the whole suite works together, and you should confirm the City's current rules on additional units first.
Yes. It needs a drain and vent routed under the floor, which we plan from your drawings before the reno starts. In most Richmond Hill houses with a basement below, it is straightforward. Our kitchen rough-in cost guide explains what drives the price.
Yes. Supply, drain with a proper high loop or air gap, and the connection to the sink drain. See our Richmond Hill dishwasher installation page.
Yes. We run a dedicated line with its own shut-off so a leak at the fridge can be stopped without shutting off the kitchen.
All the time. We rough in before the cabinets go in and come back for the final hookups once the counters are set, so the plumbing never holds up the schedule.
Same-day for fixture swaps and repairs. Full kitchen rough-ins are typically quoted within 24 to 48 hours of seeing the plans or the site.

How do I get started?

Call 647-402-4825 or send a few details through the contact page. You get an estimated arrival time on the call and a written quote before any work starts.