Garbage disposal services in Markham.
Garburator installation, replacement and repair. Connected properly to the drain and the dishwasher, sealed at the sink, and tested so it does not leak into the cabinet. Licensed plumbers, upfront pricing.

Do I need a plumber to install a garburator?
For a first-time install or a leaking one, yes. The unit has to be sealed at the sink flange, connected to the drain correctly and tied to the dishwasher discharge, and we tell you what the electrician needs to provide.
A garburator looks like an appliance, but everything that goes wrong with it is plumbing: the mounting ring leaks at the sink flange, the drain connection drips, the dishwasher discharge is tied in wrong and backs up, or the unit jams and trips because of what went down it. Seal Plumbing installs, replaces and repairs garburators across Markham, and we connect them the way the drain and the dishwasher need, not just the way the box says.
Adding a garburator to a kitchen that never had one takes a little planning: the drain assembly changes, the dishwasher discharge moves to the unit, and the electrical has to be in place. We handle the plumbing side and tell you what the electrician needs to provide. On a septic system, which many rural properties around Markham have, we talk through whether a garburator is a good idea at all.
Pete and Joseph quote the work upfront. Our garburator planning guide covers what to think about before buying one, and our Markham kitchen plumbing page covers the rest of the kitchen.
Garburator services in Markham
- New garburator installation
- Replacement of a failed unit
- Leaks at the sink flange or drain
- Jams, humming & tripping units
- Dishwasher discharge connections
- Drain assembly changes for a new unit
How does garbage disposal services work in Markham?
Confirm the setup, install or repair, connect the dishwasher, test everything.
Get in touch
Tell us whether it is a repair, a replacement or a first install, and the unit if you have one.
Check the setup
We confirm the sink flange, the drain assembly, the dishwasher connection and the electrical are ready for the unit.
Install or repair
Unit mounted and sealed, drain and dishwasher connected properly, or the failed part replaced.
Test and clean up
Run under water with the dishwasher discharging, checked for leaks, cabinet left clean.


What does garbage disposal services cost in Markham?
Most garburator installations and replacements in Markham run $250 to $600. These are Seal Plumbing's estimate ranges as of October 2026, before tax; your written quote is the number that counts.
Garburator installation or repair in Markham is priced before we start, usually a same-day visit. The price depends on whether it is a like-for-like replacement, a first-time install that changes the drain assembly, or a repair of a leak or jam.
Every job is quoted before work starts, in writing for anything beyond a small repair, and the quote is the number that counts. Same-day quotes on most small jobs; larger projects within 24 to 48 hours of a site visit.
Should you install a garburator in your Markham kitchen?
A garburator can work well in a Markham kitchen if the drain line is sound and grease stays out of the sink.
Check the drain first
In older Markham Village or Unionville homes, the kitchen drain may be original cast iron or galvanized pipe. A garburator sends more solids down that line. We look at the drain before installation and tell you if the line can handle it or needs replacing.
Grease still goes in the green bin
A garburator does not make grease safe for your drain. Markham asks residents to put fats, oils and grease in the green bin, and that still applies with a disposal under the sink. Grease cools and sticks no matter how finely the food is ground.
Dishwasher connection
Most garburators connect to the dishwasher drain. When we install a new unit, we remove the knockout plug inside the inlet and secure the hose with a high loop. Skipping that step is the most common reason a dishwasher stops draining after a garburator goes in.
A garburator that hums but does not spin is usually jammed, not broken. Turn off the power, use the hex key on the bottom to free it, and press the reset button. If it still hums or trips the breaker, the motor may be failing. We test it and tell you if repair or replacement makes sense.
What other plumbing services do you offer in Markham?
The same two licensed plumbers, across everything a Markham home needs.
What does your recent work look like?
Sinks, hookups and rough-ins from recent kitchen jobs across the GTA and Simcoe County. Tap a photo for a closer look.
Which Markham areas do you serve?
From Markham Village, Unionville and the Markham side of Thornhill to German Mills, Milliken Mills and Armadale, plus Buttonville, Berczy Village, Angus Glen, Wismer, Greensborough, Cornell, Cathedraltown, Box Grove and the streets in between.
Also serving nearby: Richmond Hill, Stouffville, Vaughan, Toronto and Pickering. See all service areas →
Need something else? See our Markham plumber page or the full service and repairs overview.
Garbage Disposal Services nearby: Richmond Hill, Stouffville and Vaughan.
Garbage Disposal Services questions Markham homeowners ask
How do I get started?
Call 647-402-4825 or send a few details through the contact page. You get an estimated arrival time on the call and a written quote before any work starts.