Burst pipe repair in Vaughan.
Frozen line that split overnight, a copper pinhole spraying inside a wall, a fitting that let go. We find the break, repair or replace the section properly, and get the water back on. Licensed plumbers, upfront pricing.

What should I do about a burst pipe in Vaughan?
Shut off the main water valve, open a tap to drain pressure, and call 647-402-4825. We locate the actual split, replace the damaged section in copper or PEX and pressure test it before closing up.
Vaughan winters are hard on plumbing. Supply lines in exterior walls, garages, crawl spaces and unheated basements freeze, expand and split, and the leak shows up when things thaw. Older homes in the Woodbridge, Maple and Kleinburg village cores, and the first post-war streets of 1950s and 1960s Woodbridge, add aging copper and galvanized pipe that fails on its own. Seal Plumbing repairs burst pipes in all of them: we isolate the line, open the smallest access needed, replace the damaged section in copper or PEX and pressure test before we close up.
A burst pipe is also a warning. If one section froze, the rest of that run is exposed to the same cold. If a copper pinhole opened up, more are coming. Pete and Joseph tell you honestly what caused it and whether rerouting, insulating or replacing a longer run makes sense, priced separately so you decide.
If water is running right now, shut off the main valve first. Our pipe insulation guide covers how to keep exposed lines from freezing again, and our emergency plumbing page explains what to expect when you call.
Burst pipe work in Vaughan
- Frozen & split supply line repair
- Copper pinhole & fitting failures
- Section replacement in copper or PEX
- Rerouting lines out of cold walls
- Pipe insulation & freeze protection
- Shut-off valve replacement
How does burst pipe repair work in Vaughan?
Isolate, locate, repair, test. Then an honest word on the rest of the line.
Get in touch
Tell us where the water is showing. We tell you which valve to close and give you an estimated arrival time.
Locate the break
We trace the leak to the actual split, which is often not where the water appears, and open the smallest access needed.
Repair
The damaged section is cut out and replaced, fittings are properly joined, and the line is pressure tested.
Protect
We tell you if the run is still at risk and quote insulation, rerouting or a longer replacement separately.


What does burst pipe repair cost in Vaughan?
Most burst and frozen pipe repairs in Vaughan run $250 to $500. These are Seal Plumbing's estimate ranges as of October 2026, before tax; your written quote is the number that counts.
Burst pipe repair in Vaughan is priced on site before the work starts. A short section replacement at an accessible spot is the low end; a split inside a finished wall or a long frozen run costs more because of access and pipe length.
Every job is quoted before work starts, in writing for anything beyond a small repair, and the quote is the number that counts. Same-day quotes on most small jobs; larger projects within 24 to 48 hours of a site visit.
Why do pipes burst in Vaughan homes?
Cold snaps, shallow service lines and aging pipe all play a part, and the City's own winter advice points to where to look first.
Keep it above 8 °C
The City of Vaughan advises keeping any area with indoor water pipes above 8 °C, especially near the water meter. Garages, crawl spaces and pipes along outside walls are the usual weak spots. We reroute or insulate lines that keep freezing so the same repair is not needed again next January.
Frozen meters
A water meter can freeze too, and a frozen meter can be damaged. In Vaughan a damaged meter has to be replaced with a new one bought from the City and installed by a licensed plumber. We install the replacement and repair the split piping on either side of it.
Outdoor taps in the fall
Many split pipes start at a hose bib. Shut the indoor valve that feeds the outdoor tap, then leave the outside tap open so leftover water has room to expand, as the City recommends. Frost-free bibs help, but only if the hose is off before the first hard freeze.
Watch for the signs the City lists: little or no water at a tap, frost on exposed pipes, or an odd smell from a faucet or drain. Together they usually point to a freeze in progress. Shut the main, open the affected tap and call before the pipe thaws and the leak begins.
What other plumbing services do you offer in Vaughan?
The same two licensed plumbers, across everything a Vaughan home needs.
What does your recent work look like?
Repairs, manifolds and supply runs from recent jobs across the GTA and Simcoe County. Tap a photo for a closer look.
Which Vaughan areas do you serve?
We serve homes and businesses across Vaughan: Woodbridge, Sonoma Heights and Vellore, Maple and Concord, Thornhill west of Yonge Street, Kleinburg and Nashville, Glen Shields, and the new towers around the Vaughan Metropolitan Centre.
Also serving nearby: King City, Richmond Hill, Brampton, Bolton and Toronto. See all service areas →
Need something else? See our Vaughan plumber page or the full service and repairs overview.
Burst Pipe Repair nearby: King City, Richmond Hill, Brampton and Bolton.
Burst Pipe Repair questions Vaughan homeowners ask
How do I get started?
Call 647-402-4825 or send a few details through the contact page. You get an estimated arrival time on the call and a written quote before any work starts.