Hydro jetting in Markham.
When snaking clears the line for a month and the clog comes back, the pipe walls are the problem. Hydro jetting scours grease, scale and sludge off the inside of the drain with high-pressure water, after a camera confirms the pipe can take it.

When is hydro jetting the right fix?
Hydro jetting is the right fix when a drain clears with a snake but clogs again within weeks, which means grease, scale or sludge is coating the pipe walls. We camera the line first to confirm the pipe can take high pressure.
A cable auger clears a blockage by cutting a path through it. The grease, soap scale and sludge coating the pipe walls stay where they are, and the drain narrows again. Hydro jetting is different: a high-pressure water nozzle travels the line and washes the walls clean, restoring the full diameter of the pipe. For kitchen lines, long runs to the main and lines that clog on a schedule, it is the fix that holds.
Jetting is not the first tool we reach for. Old clay or cast iron with cracks, offsets or roots can be damaged by high pressure, so Seal Plumbing runs a camera first and only jets a line that can take it. If the camera shows a broken section instead, we tell you, because jetting will not fix a pipe that is already failing.
Pete and Joseph quote the camera inspection and the jetting in writing before any work starts. See our Markham drain cleaning page for the full drain service.
Hydro jetting in Markham
- Camera inspection before jetting
- Kitchen line grease removal
- Scale & sludge in older drains
- Long main drain runs
- Repeat-clog lines
- Post-jetting camera check
How does hydro jetting work in Markham?
Camera first, jet second, camera again to confirm the line is clean.
Get in touch
Tell us how often the drain clogs and what has been tried. Repeat clogs on a schedule are the typical candidate.
Camera inspection
We scope the line to confirm the pipe is sound enough for high pressure and find where the build-up is.
Jet the line
The nozzle travels the run and scours the walls clean, flushing debris to the main.
Confirm
A second camera pass confirms the full diameter is restored and shows you the result.


What does hydro jetting cost in Markham?
The camera inspection is about $350; the hydro jetting itself is quoted in writing once we have seen the line. These are Seal Plumbing's estimate ranges as of October 2026, before tax; your written quote is the number that counts.
Hydro jetting in Markham is quoted in writing with the camera inspection included. The price depends on the length of the line, how heavy the build-up is and whether a second camera pass is needed to confirm the result.
Every job is quoted before work starts, in writing for anything beyond a small repair, and the quote is the number that counts. Same-day quotes on most small jobs; larger projects within 24 to 48 hours of a site visit.
When does hydro jetting make sense for a Markham drain?
Jetting is for lines that clog again weeks after snaking, and for drains that need a clean wall before repair or lining.
Before a lateral is relined
Markham's rebate program lists storm and sanitary lateral relining among its measures. A liner needs a clean pipe wall to bond to, so the line is jetted first to strip grease, scale and roots, then filmed again to confirm it is ready. Skipping that step shortens the life of the liner.
Older cast iron in Thornhill
Homes built through the 1960s and 70s in Thornhill can have cast iron drains with years of scale inside. Snaking punches a hole through it; jetting scours the wall back. We start with a camera, adjust pressure to the pipe and check afterward that the old iron is still sound.
Grease-heavy kitchen lines
A busy family kitchen sends more grease down the drain than most people think. Markham asks residents to put fats, oils and grease in the green bin for good reason. When a kitchen line has a grease coat built up over years, jetting clears the full diameter, not just a path through the middle.
Jetting is not the answer for every Markham drain. If the camera shows a collapsed section or a broken joint, water pressure will not fix it, and we will tell you so before starting. For lines in good shape that keep clogging, a proper jetting and a follow-up camera check usually ends the cycle of repeat calls.
What other plumbing services do you offer in Markham?
The same two licensed plumbers, across everything a Markham home needs.
What does your recent work look like?
Drain lines, stacks and repairs from recent jobs across the GTA and Simcoe County. Tap a photo for a closer look.
Which Markham areas do you serve?
From Markham Village, Unionville and the Markham side of Thornhill to German Mills, Milliken Mills and Armadale, plus Buttonville, Berczy Village, Angus Glen, Wismer, Greensborough, Cornell, Cathedraltown, Box Grove and the streets in between.
Also serving nearby: Richmond Hill, Stouffville, Vaughan, Toronto and Pickering. See all service areas →
Need something else? See our Markham plumber page or the full service and repairs overview.
Hydro Jetting nearby: Richmond Hill, Stouffville and Vaughan.
Hydro Jetting questions Markham homeowners ask
How do I get started?
Call 647-402-4825 or send a few details through the contact page. You get an estimated arrival time on the call and a written quote before any work starts.